Animas 2020 User's Guide download pdf (Page 32)

Page 32

Priming the Pump and Infusion Set

These steps must be followed in order.

Note: As each step is completed, the checkbox on the ezPrime menu will be shaded.



Never prime tubing or tighten the cartridge cap while the infusion set is connected 

to your body. Doing so while the infusion set is connected to your body can result

in unintended delivery of insulin, which can result in serious injury or death.

1. Make sure you are disconnected from the pump.

2. From Main Menu, select Prime/Rewind.

3. On ezPrime Menu, Rewind is highlighted. Press OK. The Rewind Motor screen is displayed.

4. Scroll up to Go Rewind. Press OK. The pump will rewind the piston rod.

5. When the rewind action is complete, the Rewind Complete screen is displayed. The pump

will beep once to let you know the rewind is complete.

Note: If using a partially ﬁlled cartridge, you can select Stop during the Rewind Active function

to stop the rewind at the position desired. Periodically, the pump is required to do a Full

Rewind and will not offer the option of selecting the Stop position. A Full Rewind is always

required when a battery is inserted.

6. Insert your ﬁlled cartridge.

7. Secure cartridge compartment cap to pump by turning in a clockwise motion until ﬁnger

tight but do not over tighten.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 115 116

No comments

Animas 2020 User's Guide Page 32